 |
304 & 316 Tank material-With Scrap
|
 |
PRODUCTS: SCRAP
| Stainless Steel Scrap |
| In Grades like: - 304, 304L, 309, 310, 316, 316L, 317L, 409, 410, 410S, 416, 420, 430 etc.2304(duplex), 2205 (duplex) & 2507 (Super Duplex). |
| |
| High Nickel Alloys Scrap |
Nickel & Copper Alloys |
|
70Cu-30Ni |
90Cu-10Ni |
R-Monel |
K-Monel |
Cast Monel |
|
Duplex Scrap
|
|
|
|
TYPICAL |
|
|
|
EN |
ASTM |
C |
CR |
Ni |
Mo |
N |
LDX 2101 |
1.4162 |
S32101 |
.03 |
21.5 |
1.5 |
0.3 |
.22 |
2304 |
1.4362 |
S32304 |
.02 |
23.0 |
4.8 |
0.3 |
.10 |
2205 |
1.4462 |
S31803/
S32205 |
.02 |
22.0 |
5.7 |
3.1 |
.17 |
2507 |
1.4410 |
S32750 |
.02 |
25.0 |
7.0 |
4.0 |
.27 |
Nickel & Nickel Alloys
|
80% Ni-20% CR |
IN100 |
Alloy 42 |
Inconel 600 |
Alloy 454 (PWA 1480) |
Inconel 617 |
B-1900 (PWA 663) |
Inconel 625 |
C101 |
Inconel 713C (PWA 655) |
C263 |
Inconel 718 |
C1023 |
Inconel X750 |
GMR 235 |
Inconel 738 |
GTD 222 |
Inconel 792 |
Hastelloy B |
M252 |
Hastelloy C |
MAR-M 002 |
Hastelloy D |
MAR-M 200 (PWA 664) |
Hastelloy F |
MAR-M 246 |
Hastelloy N |
MAR-M 247 |
Hastelloy S |
Pure Nickel |
Hastelloy W |
PWA 1484 |
Hastelloy X |
Rene 41 |
Incoloy 800 |
Rene 77 |
Incoloy 801 |
Rene 80 |
Incoloy 903 |
Rene 95 |
Incoloy 907 |
Waspaloy |
Incoloy 909 |
|
|
INVEST MENT CASTING INDUSTRY:- |
- Scrap Suitable for Small Furnaces from 15kgs to 100 Kgs.
- Less in diameter and length for easy melt.
- Plate Cutting & Rod cuttings for better results.
- Free from oil, dirt, colour and any other foreign particles.
- Guaranteed chemical composition as per ASTM standards.
|
| |
SAND CASTING INDUSTRY:- |
- Scrap suitable for bigger furnaces from 100kgs to 2 ton.
- Less in diameter and length for easy melt.
- Purely Foundry Grade scraps for induction furnaces & Casting units.
- Scrap for foundry industry is majorly plate cuttings, rod cuttings, pipe cutting, punching scrap etc. Different companies are catered according to their needs.
|
| |
MILLS:- |
- Complete chemical composition guarantee of Nickel & Moley percentage.
- Scrap suitable for large furnaces.
- Maximum out put of the melt having less burning loss.
|
|
|
Carbon steel flanges
Duplex Scrap 2205 and 2507
Industrial Scrap
Slitage Coil
SS316 Cut Plate
|
| TYPE |
C MAX |
Mn MAX |
P MAX |
S MAX |
SI |
Cr |
NI |
Mo |
Others |
| 304 |
0.08 |
2 |
0.045 |
0.03 |
1 |
18.00/20.00 |
8.0/10.00 |
- |
- |
| 304L |
0.035 |
2 |
0.045 |
0.03 |
1 |
18.00/20.00 |
8.00/10.00 |
- |
- |
| 304N |
0.08 |
2 |
0.045 |
0.03 |
1 |
18.00/20.00 |
8.00/10.00 |
- |
NO.101 0.016 |
| 308 |
0.08 |
2 |
0.045 |
0.03 |
1 |
19.00/21.00 |
10.00/12.00 |
- |
- |
| 309 |
0.2 |
2 |
0.045 |
0.03 |
1 |
22.00/24.00 |
12.00/15.00 |
- |
- |
| 310 |
0.25 |
2 |
0.045 |
0.03 |
1.5 |
24.00/26.00 |
19.00/22.00 |
- |
- |
| 310$ |
0.08 |
2 |
0.045 |
0.03 |
1.5 |
24.00/26.00 |
19.00/22.00 |
- |
- |
| 314 |
0.25 |
2 |
0.045 |
0.03 |
1.50/3.00 |
23.00/26.00 |
19.00/22.00 |
- |
- |
| 316 |
0.08 |
2 |
0.045 |
0.03 |
1 |
16.00/18.00 |
10.00/14.00 |
2.00/3.00 |
- |
| 316L |
0.035 |
2 |
0.045 |
0.03 |
1 |
16.00/18.00 |
10.00/14.00 |
2.00/3.00 |
- |
| 316F |
0.08 |
2 |
0.045 |
0.03 |
1 |
16.00/18.00 |
10.00/14.00 |
1.75/2.50 |
- |
| 316TI |
0.08 |
2 |
0.045 |
0.03 |
1 |
16.00/18.00 |
10.00/14.00 |
2.00/3.00 |
TI 5*C MIN. |
| 316Cb |
0.08 |
2 |
0.045 |
0.03 |
1 |
18.00/20.00 |
10.00/14.00 |
2.00/3.00 |
Nb. 10*C MIN |
| 317L |
0.035 |
2 |
0.045 |
0.03 |
1 |
18.00/20.00 |
11.00/15.00 |
3.00/4.00 |
- |
| 321 |
0.08 |
2 |
0.045 |
0.03 |
1 |
17.00/19.00 |
9.00/12.00 |
- |
Ti 5*C MIN |
| 347 |
0.08 |
2 |
0.045 |
0.03 |
1 |
17.00/19.00 |
9.00/12.00 |
- |
Nb Ta 10*C MIN |
| 410 |
0.15 |
1 |
0.04 |
0.03 |
1 |
11.50/13.50 |
- |
- |
- |
| 410$ |
0.08 |
1 |
0.04 |
0.03 |
1 |
11.50/13.50 |
0.60MAX |
- |
- |
| 420 |
0.15MIN |
1 |
0.04 |
0.03 |
1 |
12.00/14.00 |
- |
- |
- |
| 440A |
0.60/0.70 |
1 |
0.04 |
0.03 |
1 |
16.00/18.00 |
- |
0.75MAX |
- |
| 440B |
0.75/0.95 |
1 |
0.04 |
0.03 |
1 |
16.00/18.00 |
- |
0.75 MAX |
- |
| 440C |
0.95/1.20 |
1 |
0.04 |
0.03 |
1 |
16.00/18.00 |
- |
0.75 MAX |
- |
| 446 |
0.2 |
1.5 |
0.04 |
0.03 |
1 |
23.00/27.00 |
- |
- |
N.O.25 MAX |
|
|
